Haartz Sailcloth Vinyl

Home

/

Category

/

Vinyl Materials

/

Convertible Top Vinyl

/

Haartz Sailcloth Vinyl

Sailcloth Vinyl - Black with Black Backing (Part #SC-1612)

Every monitor is different; due to variations in monitor settings and that impact on color presentation online, colors are representative only and are not guaranteed to be an exact match. Email us at info@upholsterysupplyusa.com to request a free sample!

Price determined by quantity purchased. View quantity discount tiers

$33.00 per Yard (1 to 10)

$31.00 per Yard (11 to 25)

$29.00 per Yard (26+)

Haartz Sailcloth Vinyl is a durable automotive exterior vinyl primarily used for convertible tops.

Topcoated & Embossed PVC
UV stabilized pigments to resist fading
Meets or exceeds Flammability Standards
Tear resistant
Mold and mildew resistant
Rot-proof
5 year warranty
Roll Width is 60 inches

Please note: one yard cuts of material are not eligible for return.

Wicking Resistance	GM9146P = Pass
Flex Resistance	GM9216P = Pass
Performance	Tear resistant Mold & Mildew resistant Rot-Proof Fade resistant
Brand	Haartz
Composition	Topcoated & Embossed PVC face with a 100% PET Drill backing
Roll Width	60 inches
Thickness	0.9 MM (33-OZ)
Abrasion	High in Abrasion
Warranty	5 Years
Flammability Standards	Automotive FMVSS 302 & GM9070P ***This information and data refer to typical performance results in the specific test(s) indicated and does not imply, specifically or otherwise, the behavior of this or any other material under actual fire conditions.
UV Stabilized Pigments	YES
Applications	Convertible Tops, Phantom Tops, Simulated Tops
Material	Fabric Laminate
Roll Size	60 Yards

Cleaning Products	Haartz recommends RAGGTOPP Cleaner, RAGGTOPP Premium Convertible Top Brush, and RAGGTOPP Protectant. Available online.
Washing	Washes with low pressure water jets and hanging cloths provide a more gentle cleaning action. Those using heavy barrel brushes could damage the top material. Haartz recommends hand washing in compliance with local laws and regulations.
Care Instructions	Clean Normal Stains: Hand washing in shade or partial shade is best (try to avoid direct sunlight). Bird and tree droppings, as well as other loose particle matter, should be removed promptly from the topping material. Vacuum the top with a brush attachment and rinse the vinyl top thoroughly with water to remove loose particle matter. This will also prevent dirt and other debris from being redeposited during the cleaning process. After rinsing the top thoroughly, apply RAGGTOPP™ Cleaner* evenly over the entire top. . RAGGTOPP™ Cleaner works best on a wet surface. Allow the cleaner to remain on the top surface for 10 to 20 minutes (avoid direct sunlight) and then scrub the top lightly with the RAGGTOPP™ Premium Convertible Top Brush, a soft nylon brush, or a terry cloth rag. Rinse thoroughly with lukewarm water until no remaining soap foam is observed. Repeat this procedure for very soiled tops. Allow the top to dry before use. Clean Stubborn Stains: The vinyl coating itself does not promote mildew growth, but mildew may grow on dirt and other matter that is not removed from the top. For stubborn cases, apply a solution of no more than 1/2 cup (4 oz. / 120ml) bleach (5-8% Sodium Hypochlorite solution...Clorox/Dan Klorix brand or similar) and 1/4 cup (2 oz. / 60ml) RAGGTOPP™ Cleaner per gallon (3.8 liter) of water. Rinse thoroughly with cool to cold water. Please note that excessive soaking with bleach solution can weaken seam threads. Rinse the entire top to remove all of the bleach solution from the vinyl, and riThe vinyl coating itself does not promote mildew growth, but mildew may grow on dirt and other matter that is not removed from the top. For stubborn cases, apply a solution of no more than 1/2 cup (4 oz. / 120ml) bleach (5-8% Sodium Hypochlorite solution...Clorox/Dan Klorix brand or similar) and 1/4 cup (2 oz. / 60ml) RAGGTOPP™ Cleaner per gallon (3.8 liter) of water. Rinse thoroughly with cool to cold water. Please note that excessive soaking with bleach solution can weaken seam threads. Rinse the entire top to remove all of the bleach solution from the vinyl, and rinse the car body to prevent streaking on painted, chrome or other surfaces. Repeated cleanings may be necessary. Additional Tips: Properly formulated and coated vinyl is waterproof so additional treatment is unnecessary. To help protect and preserve the beauty of vinyl topping, you can follow the cleaning process with an application of RAGGTOPP™ Vinyl Protectant. Simply spray the protectant on the topping material and wipe dry with a clean cotton cloth. Reapply after each cleaning or as necessary. Do not use top dressing cleaners or conditioners containing silicones, organic solvents, petroleum distillates or plasticizers as these may permanently harm the top material’s vinyl coating.